preliminary data this is preliminary information on a new product now in deve lopment or undergoing evaluation. details are subject to change without notice. may 2009 doc id 15663 rev 1 1/10 10 STT13005FP high voltage fast-switching npn power transistor features high voltage capability minimum lot-to-lot spread for reliable operation very high switching speed applications electronic ballast fo r fluorescent lighting flyback and forward single transistor low power converters description the device is manufactured using high voltage multi-epitaxial planar technology for high switching speeds and m edium voltage capability. it uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide rbsoa. the device is designed for use in lighting applications and low co st switch-mode power supplies. figure 1. internal schematic diagram sot-32fp 3 2 1 table 1. device summary order codes marking packages packaging STT13005FP t13005fp sot-32fp bulk www.st.com
electrical ratings STT13005FP 2/10 doc id 15663 rev 1 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit v ces collector-emitter voltage (v be = 0) 700 v v ceo collector-emitter voltage (i b = 0) 400 v v ebo emitter-base voltage (i c = 0) 9 v i c collector current 2 a i cm collector peak current (t p < 5 ms) 4 a i b base current 1 a i bm base peak current (t p < 5 ms) 2 a p tot total dissipation at t c = 25 c 30 w t stg storage temperature -65 to 150 c t j max. operating junction temperature 150 c
STT13005FP electrical characteristics doc id 15663 rev 1 3/10 2 electrical characteristics (t case = 25 c unless otherwise specified) table 3. electrical characteristics symbol parameter test conditions min. typ. max. unit i ces collector cut-off current (v be = 0) v ce = 700 v v ce = 700 v t c = 125 c 100 500 a a i ceo collector cut-off current (i b = 0) v ce = 400 v 250 a v ebo emitter-base voltage (i c = 0) i e = 10 ma 9 v v ceo(sus) (1) collector-emitter sustaining voltage (i b = 0) i c = 10 ma 400 v v ce(sat) (1) collector-emitter saturation voltage i c = 0.5 a i b = 125 ma i c = 0.8 a _ i b = 0.2 a i c = 1.6 a _ i b = 0.4 a 0.5 1 1.5 v v v v be(sat) (1) base-emitter saturation voltage i c = 0.5 a i b = 125 ma i c = 0.8 a _ i b = 0.2 a i c = 1.6 a _ i b = 0.4 a 1 1.3 1.5 v v v h fe (1) 1. pulsed duration = 300 s, duty cycle 1.5% dc current gain i c = 0.5 a _ v ce = 5 v i c = 2 a _ _ v ce = 5 v 10 8 50 t r t s t f resistive load rise time storage time fall time i c = 1 a v cc = 125 v i b1 = -i b2 = 0.2 a 0.4 3.2 0.25 0.7 4.5 0.4 s s s t s t f inductive load storage time fall time i c = 1 a i b1 = 0.2 a v be(off) = -5 v l= 50 mh v clamp = 300 v 0.8 0.16 s s
electrical characteristics STT13005FP 4/10 doc id 15663 rev 1 2.1 electrical characteristics (curves) figure 2. safe operating area figure 3. derating curve figure 4. dc current gain figure 5. dc current gain figure 6. collector-emitter saturation voltage figure 7. base-emitter saturation voltage
STT13005FP electrical characteristics doc id 15663 rev 1 5/10 figure 8. inductive load fall time figure 9. inductive load storage time figure 10. resistive load fall time figure 11. resistive load storage time figure 12. reverse biased soa
electrical characteristics STT13005FP 6/10 doc id 15663 rev 1 2.2 test circuits figure 13. resistive load switching test circuit 1. fast electronic switch 2. non-inductive resistor figure 14. inductive load switching test circuit 1. fast electronic switch 2. non-inductive resistor 3. fast recovery rectifier
STT13005FP package mechanical data doc id 15663 rev 1 7/10 3 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark.
package mechanical data STT13005FP 8/10 doc id 15663 rev 1 dim. mm. min. typ max. a 3 .00 3 .40 a1 1. 8 0 2.20 b 0.66 0. 8 6 b 1 1.17 1. 3 7 c 0.45 0.60 d7. 8 0 8 .20 e 10. 8 0 11.20 e2.2 8 e1 4.46 4.66 l 15. 3 0 15.70 l1 1. 3 0 1.50 p 4.04 4.24 ?1 2.90 3 .10 ?2 3 .10 3 . 3 0 s ot- 3 2fp mechanical data 8 120996b
STT13005FP revision history doc id 15663 rev 1 9/10 4 revision history table 4. document revision history date revision changes 06-may-2009 1 initial release
STT13005FP 10/10 doc id 15663 rev 1 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2009 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
